| DURAMEDIA Compositions |
D10
An extremely hard, fine grained, abrasive free media. For burnishing, polishing, light deburring and, driving loose abrasives. Exceptional impact resistance for a media of its hardness. (85 lbs./ft') |
D20
A versatile, general purpose, mildly abrasive media. Combines low media wear rate with reasonable metal removal rate. For a fine finish and (with proper compounding) burnishing. (90 lbs./ft.') |
D30 A High Performance cutting, deburring and surface improvement media. For fast metal removal and a fine finish with medium wear rate (95 lbs./ft.')
|
D40 An extremely fast cutting media for rapid cut down, radiusing, deburring and surface improvement. A larger quantity of the same fine fused aluminum oxide used in D20 & D30 provides similar fine finishes at a faster rate, Maximum metal removal in minimum time. (100 lbs./ft.') |
D50
A relatively fast wearing; fast cutting silicon carbide media. Recommended for use where exposure to aluminum oxide cannot be tolerated. For use on cemented carbides, high alumina ceramics, and on parts to be welded or brazed in a later operation. (90 lbs./ft.') |
WK
An efficient fast cutting media for use in all types of mass finishing equipment. This media is extremely durable when used in a rugged application. (Approximately 100 lbs./ft.') |
140 This is a sintered media utilizing the same composition as our DURALUM XM. It is now available in preforms for applications where size and shape is critical. It is excellent for low surfaces finishes, burnishing or as a driver for loose abrasives. (140 lbs./ft.') |
| DURALITE Compositions |
LW is a light weight ceramic media with an excellent cut to wear ratio. Designed for use on delicate parts or where aluminum oxide is undesirable. For use in all types of mass finishing equipment and on all materials. (63 lbs./ft.') |
LWS Is a light weight ceramic media produced with silicon carbide and used where an aggressive cut is required. An example would be cut of burrs on steel tubing or aluminum extrusions (67 lbs./ft.') |
